Expander Tooling For BendPak® Machines
We offer a wide variety of expanding tooling that can be utilized on your BendPak® machine. All tooling is machined to specific tolerances from solid steel. It is then gas-carburized and oil quenched to a minimum hardness of Rockwell ‘C’ scale. All tooling is available from shelf stock. However Huth will manufacture custom tooling to your specifications for tooling not listed.
BendPak® is a registered trademark of BendPak
Contact Us for Details >
PKSA112 Direct Fit Arbor for BendPak Machines
BendPak® is a registered trademark of BendPak, Inc.
| No. | Product Description |
|---|---|
| PKSA112 | Arbor, 1 1/2” – 4” |
PKSS112 & PKSS400 Direct Fit Segment Sets for BendPak Machines
To be used with the PKSA112 Arbor
| No. | Product Description |
|---|---|
| PKSS112 | Segment Set, 1 1/2″ |
| PKSS134 | Segment Set, 1 3/4″ |
| PKSS200 | Segment Set, 2″ |
| PKSS214 | Segment Set, 2 1/4″ |
| PKSS212 | Segment Set, 2 1/2″ |
| PKSS234 | Segment Set, 2 3/4″ |
| PKSS300 | Segment Set, 3″ |
| PKSS312 | Segment Set, 3 1/2″ |
| PKSS400 | Segment Set, 4″ |
Huth Expander Sleeves
Create Expansions quickly and easily with expander sleeves! Our Huth expander sleeves are ideal for less frequent expansions where you don’t want to invest in a case-hardened segmented expander tool. Simply slide the expander sleeve over your current 3″ segment set and use it like any other segment.
The new Huth Expander sleeves fit over your existing tooling. All the expander components are designed to fit over Huth, Ben Pearson, and BendPak 3” segment sets (H476, BP761550, and PKSS300) and will create the ID listed in the tool description.
| No. | Product Description |
|---|---|
| 9001-35 | 3 1/2″ Expander Sleeve |
| 9001-40 | 4″ Expander Sleeve |
| 9001-45 | 4 1/2″ Expander Sleeve |
| 9001-50 | 5″ Expander Sleeve |
O-Ring Kits for BendPak® Machines - PKSR25 AND PKRR50
| No. | Product Description |
|---|---|
| PKSR25 | Steel O-Ring Kit For BendPak® Machines, for PKSS Segments, 25 pieces |
| PKRR50 | Rubber O-Ring Kit for BendPak® Machines, for PKSS Segments, 50 pieces |
Huth Ball Joint Segments
Create Male and Female Ball Joints. This Huth tooling works with the PKSA112 Direct Fit Arbor.
| No. | Product Description |
|---|---|
| 410 | 1 3/4″ – 1 7/8″ Ball Joint |
| 419 | 2″ |
| 420 | 2 1/4″ |
| 421 | 2 1/2″ |
| 454 | 2 3/4″ |
| 452 | 3″ |
Bead Segments
Create beads for hoses and clamps. This Huth tooling works with the PKSA112 Direct Fit Arbor,
| No. | Product Description |
|---|---|
| 463 | 2″ |
| 464 | 2 1/4″ |
| 465 | 2 1/2″ |
| 466 | 3″ |
| 467 | 3 1/2″ |
| 468 | 4″ |
Note: Smaller Sizes Can Be Used By Adapting A Huth Arbor. Call For More Information.
Huth V-Band Segments
Create V Band Joints. This Huth tooling works with the PKSA112 Direct Fit Arbor.
| No. | Product Description |
|---|---|
| 435 | 2″ |
| 436 | 2 1/4″ |
| 437 | 2 1/2″ |
| 438 | 2 3/4″ |
| 439 | 3″ |