Huth Die Packages
Die Packages
Huth Tooling Packages
Tooling Packages
Huth Tooling for BendPak® Machines
Huth Tooling for BendPak® Machines
Huth Bending Packs and Size Packs
Bending Packs and Size Packs
Huth Tooling Fabrication Packs
Tooling Fabrication Packs
Huth Bending Dies & Shoes
Bending Dies & Shoes
Huth End Finishing Swager
End Finishing Swager
Huth Tube and Pipe End Finishing Expander Parts
End Finishing Expander
Huth Square Bending Tooling
Square Bending Tooling
Huth End Finishing Packages
End Finishing Packages

Huth End Finishing Swager

All Huth tooling is machined to specific tolerances from solid steel. After it is machined, it is gas-carburized and oil quenched to a minimum hardness of 58 Rockwell “C” scale. We do not use cast iron for any of our tooling. All Huth tooling is available from shelf stock. However, Huth will manufacture custom tooling to your specification for sizes not listed in this schedule.

Contact Us for Details >
Two half-rings are dark grey clamp collets for the Huth end-finishing swager.

Clamp Collets (All Models After Jan '85)

No. Imperial Size
1775
Shop Now		 3/4″ EMT
1709
Shop Now		 1″ EMT
1710
Shop Now		 1″
1718
Shop Now		 11⁄8“
1714
Shop Now		 11⁄4“
1756
Shop Now		 15⁄16“
1738
Shop Now		 13⁄8“
1712
Shop Now		 11⁄2“
1758
Shop Now		 15⁄8“
1734
Shop Now		 13⁄4“
1778
Shop Now		 17⁄8“
1720
Shop Now		 2″
1720DF
Shop Now		 2″ Double Flare (Use with Part #518)
1728
Shop Now		 21⁄8“
1725
Shop Now		 21⁄4“
1723
Shop Now		 23⁄8“
1750
Shop Now		 21⁄2“
1729
Shop Now		 23⁄4“*
1731
Shop Now		 27⁄8“*
1730
Shop Now		 3″*
*Requires 892 Collet Holder

For Clamp Collets Prior To 1985 See Replacement Parts –  Vintage
No. Metric Size
1740
Shop Now		 40mm
1742
Shop Now		 42mm
1745
Shop Now		 45mm
1700
Shop Now		 48mm
1705
Shop Now		 50mm
1728
Shop Now		 54mm***
1755
Shop Now		 55mm
1760
Shop Now		 60mm
***21⁄8” = 54mm
Two cylindrical components are shown for Huth machines; the components are swage dies used for end-finishing in pipe fabrication.

Huth Swage Dies

No. Imperial Size
110
Shop Now		 1″
118
Shop Now		 11⁄8“
114
Shop Now		 11⁄4“
138
Shop Now		 13⁄8“
112
Shop Now		 11⁄2“
158
Shop Now		 15⁄8“
134
Shop Now		 13⁄4“
178
Shop Now		 17⁄8“
120
Shop Now		 2″
128
Shop Now		 21⁄8“
125
Shop Now		 21⁄4“
123
Shop Now		 23⁄8“
150
Shop Now		 21⁄2“
129
Shop Now		 23⁄4“
130
Shop Now		 3″
No. Metric Size
140
Shop Now		 40mm
142
Shop Now		 42mm
145
Shop Now		 45mm
148
Shop Now		 48mm
149
Shop Now		 50mm
128
Shop Now		 54mm***
155
Shop Now		 55mm
160
Shop Now		 60mm
***21⁄8“=54mm
Two cylindrical Huth Reducing Dies are shown next to each other, one in silver and one in a more copper-hued metal.

Huth Reducing Dies

*Reducing Dies Require Clamp Collet 890, 891, or 892.

No. Imperial Size*
775
Shop Now		 For 3/4″ EMT  .799 OD
779
Shop Now		 For 1″ EMT  1.024 OD
780
Shop Now		 2″ to 13⁄4“
781
Shop Now		 21⁄4” to 2″
782
Shop Now		 21⁄2” to 21⁄4“
783
Shop Now		 3″ to 21⁄2“
784
Shop Now		 2″ to 17⁄8“
785
Shop Now		 13⁄4” to 15⁄8 “
786
Shop Now		 15⁄8 ” to 11⁄2 “
787
Shop Now		 11⁄2” to 13⁄8“
788
Shop Now		 13⁄8” to 11⁄4 “
789
Shop Now		 11⁄4” to 11⁄ 8 “
790
Shop Now		 3″ to 23⁄4 “
No. Metric Size*
760
Shop Now		 (50mm to 45mm OD)
761
Shop Now		 (55mm to 50mm OD)
762
Shop Now		 (65mm to 60mm OD)
Two silver metal components of a female ball joint are pictured next to each other.

Ball Joint Tools - Female

No. Size
555
Shop Now		 13⁄4” , 17⁄8“, 2” (Female)
556
Shop Now		 21⁄4” to 21⁄2” (Female)
564
Shop Now		 23⁄4” to 3″ (Female)
Two tall metal tubes next to smaller metal components make up the Huth Bender Ball Joint Tools, type male.

Huth Male Ball Joint Tools

No. Size
550
Shop Now		 13⁄4” (Male)
551
Shop Now		 17⁄8” (Male)
552
Shop Now		 2″ (Male)
553
Shop Now		 21⁄4” (Male)
554
Shop Now		 21⁄2” (Male)
557
Shop Now		 13⁄4” to 21⁄2” (Domer)
558
Shop Now		 25⁄8” to 23⁄4” (Domer)
Two Huth Flaring & Flanging tools are pictured, metal cylinders with a metal cone in between.

Flaring & Flanging Tools

Flaring/Flanging Tools Specs

No. Size
518 Flare Tool – 2″ Double Flare and 11⁄2” Flat Flare*
519 Flare Tool – 13⁄4” and 15⁄8” Double Flat Flare*
853
Shop Now		 Pipe Flanger 11⁄2”  to 3″ – (Replaces Pipe Flangers 848, 849, 850, 851)
*NOT SHOWN
Huth Swager Tools: a metal cylindrical body with a wide, flat flange and a stepped shaft extending from one side.

Huth Swager Tools

No.
832 Double End Cylinder Stop- Used to control cylinder stroke
The two cylindrical, silver components of a Huth header collector tool are displayed together.

Header Collector Tool

No. Size
101
Shop Now		 3″
102
Shop Now		 31⁄2“