Die Packages
Die Packages
Tooling Packages
Tooling Packages
Huth Tooling for BendPak® Machines
Huth Tooling for BendPak® Machines
Tooling Size Packs (round)
Tooling Size Packs (round)
Tooling Fabrication Packs
Tooling Fabrication Packs
Bending Dies & Shoes
Bending Dies & Shoes
End Finishing Swager
End Finishing Swager
End Finishing Expander
End Finishing Expander
Square Bending Tooling
Square Bending Tooling

Huth Tube and Pipe End Finishing Expander Parts

Do you need an end form or size you can’t find? Expand your capacity for end-finishing operations with Huth quality tube and pipe end finishing expanders!

We offer an array of tooling and parts to replace, repair, and increase your tube and pipe end finishing expander capabilities. All Huth tooling is carefully machined to specific tolerances from solid steel.

After we machine the tooling, we gas carburize and oil-quench each piece to a minimum hardness of 58 Rockwell “C” scale. Our tooling is built to last, and we never use cast iron for any of our tooling.

The tube and pipe end finishing expander parts listed below are available from shelf stock. Need custom end finishing parts? We can make it! Huth will manufacture custom tooling and tube and pipe end finishing parts to your specifications. If the size you need isn’t listed in this schedule, or you have other questions, reach out!

Contact Us for Details >

End-Finishing Arbors and Tips

Arbors and tips are used in end finishing. They help create the expanded ends for your pipes and tubes. Because these expander end tools can see a lot of action, they can sustain wear over time. If you need a single arbor or component, we offer them here. Explore our range of replacement arbors and tips—one of the simplest and most effective updates for your machining.

No. Description
575/570 Arbor 15⁄16" – 11⁄4" ID with Spacer 570
500 Arbor 13/16" – 11/2"
508 Arbor 13⁄8" ID – 4" ID
498 Small Arbor Tip – 13⁄8" ID to 13⁄4" ID
499 Large Arbor Tip – 13/4" ID to 4" ID
572 Arbor, 13/8" ID – 13/4" ID, Solid Piece, (Same as #508 and #498 Combination)
573 Arbor, 13/4" ID – 4" ID, Solid Piece, (Same as #508 and #499 Combination)
503 Arbor 23/4" ID – 51/2" ID
574 Arbor 27/8" ID – 6" ID (H1674 Model)
495 Arbor 11/4” – 11/2” (1680/1685 Models Only)
496 Small Arbor 15/16” – 11/4” (1680/1685 Models Only)
497 Small Arbor 11/4” – 4” (Requires 498 and 499 Tips) (1680/1685 Models Only
Segments

Segments

Create expansions and useful end forms, which this will help you update your machines. One-piece arbors offer alternative end-finishing tooling when working with heavier or harder pipe and tubing materials. Please note that parts 508, 509, and 499 may be replaced with solid arbors 572 / 573.

Are you looking for older segments? Scroll down to our Vintage Replacement Parts section, which features older segments from 1-1/2" to 2-3/4".

No. Description* Comments Finger No. Replacement Rubber O’Ring Replacement Steel O’Ring
470 15⁄16" - 13⁄32" Used with 575 Arbor and 570 Spacer
Or 496 Arbor (1685 Model Only)		 670  1 - 862 1 - 867
404 13⁄32" - 11⁄4" Used with 575 Arbor and 570 Spacer
Or 496 Arbor (1685 Model Only)		 604  1 - 862 1 - 867
400 13⁄16" - 11⁄2" Used with 500 Arbor
Or 495 Arbor (1685 Model Only)		 600  1 - 862 1 - 867
472 13⁄8" - 13⁄4" Used with 572 Arbor
Or 508 Arbor with 498 Tip
Or 497 Arbor (1685 Model Only)		 672  3 - 862 3 - 867
473 13⁄8" - 13⁄4" Used with 572 Arbor
Or 508 Arbor with 498 Tip
Or 497 Arbor (1685 Model Only) 		 673  1 - 860, 1 - 862 1 - 874, 1 - 867
474 13⁄4" - 21⁄8" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 674  1 - 861, 1 - 863 1 - 866, 1 - 868 
475 21⁄8" -21⁄2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 675  1 - 862, 1 - 863 1 - 867, 1 - 868
476 21⁄2" - 3" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only) 		 676  1 - 863, 1 - 864 1 - 868, 1 - 869
477 3" - 31⁄2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 677  2 - 864  2 - 869
478 31⁄2" - 4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 678  1-875, 1-877 (Urethane)  
403 23⁄4" - 31⁄8" Used with 503 Arbor Requires 512 or 523 Adj Collar 603  1 - 863, 1 - 864  1 - 868, 1 - 869 
406 31⁄8" - 31⁄2" Used with 503 Arbor Requires 512 or 523 Adj Collar 606  2 - 862  2 - 869 
408 31⁄2" - 4" Used with 503 Arbor Requires 512 or 523 Adj Collar 608  1-875, 1-877 (Urethane)  
450 4" - 47⁄8" Used with 503 Arbor Requires 512 or 523 Adj Collar 650  2-877, 1-878 (Urethane)  
451 47⁄8" - 51⁄2" Used with 503 Arbor Requires 512 or 523 Adj Collar 651  2-879, 1-880 (Urethane)  

*All Sizes are IDs
Expander Sleeves

Expander Sleeves

Create Expansions quickly and easily with expander sleeves! Our Huth expander sleeves are ideal for less frequent expansions where you don't want to invest in a case-hardened segmented expander tool. Simply slide the expander sleeve over your current 3" segment set and use it like any other segment.

The new Huth Expander sleeves fit over your existing tooling. All the expander components are designed to fit over Huth, Ben Pearson, and BendPak 3” segment sets (H476, BP761550, and PKSS300) and will create the ID listed in the tool description.

No. Product Description  
9001-35  3 1/2" Expander Sleeve
9001-40  4" Expander Sleeve
9001-45  4 1/2" Expander Sleeve
9001-50 5" Expander Sleeve
1674 Segments

1674 Segments

Need segment parts for the Huth 1674 Broad Range Tube Expander? We have all the tooling required for your pipe end finishing expander machines, including the popular 1674 Portable Expander. Explore the grid below for the right component.

No. Description* Comments Finger No. Replacement Urethane Ring
481 27⁄8" – 31⁄2" ; 3" Long Used with 574 Arbor (1674 Model Only) 681 2 – 872, 1 – 878
481-4 27⁄8" – 31⁄2" ; 41⁄4" Long Used with 574 Arbor (1674 Model Only) 681-4 2 – 872, 1 – 878
482 33⁄8" – 4" ; 3" Long Used with 574 Arbor (1674 Model Only) 682 2 – 873, 1 – 878
482-5 33⁄8" – 4" ; 5" Long Used with 574 Arbor (1674 Model Only) 682-5 2 – 873, 1 – 878
483 37⁄8" – 41⁄2" ; 3" Long Used with 574 Arbor (1674 Model Only) 683 2 – 875, 1 – 879
483-5 37⁄8" – 41⁄2" ; 5" Long Used with 574 Arbor (1674 Model Only) 683-5 2 – 875, 1 – 879
484 43⁄8" – 5" ; 3" Long Used with 574 Arbor (1674 Model Only) 684 2 – 881, 1 – 880
484-5 43⁄8" – 5" ; 5" Long Used with 574 Arbor (1674 Model Only) 684-5 3 – 881, 1 – 880
485 47⁄8" – 51⁄2" ; 3" Long Used with 574 Arbor (1674 Model Only) 685 2 – 879, 1 – 882
485-5 47⁄8" – 51⁄2" ; 5" Long Used with 574 Arbor (1674 Model Only) 685-5 3 – 879, 1 – 882
486 53⁄8" – 6" ; 3" Long Used with 574 Arbor (1674 Model Only) 686 2 – 880, 1 – 882
486-5 53⁄8" – 6" ; 5" Long Used with 574 Arbor (1674 Model Only) 686-5 3 – 880, 1 – 882
*All Sizes are IDs
Flaring Segments

Flaring Segments

Flaring segments help you expand and create specialized tube end finishes. We offer end flaring segments if you're looking for replacement tooling for your end finishing.

No. Description Comments Finger No. Replacement Rubber O'Ring Replacement Steel O'Ring
405  11/8" - 11/2" Used with 575 Arbor and 570 Spacer
Or 496 Arbor (1685 Model Only)		 605 1 - 862 1 - 867
440  11/2" - 21/2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 640 1 - 863, 1- 864 1 - 868, 1 - 869
441  21/2" - 31/2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 641 2 - 864 2 - 869
Ball Joint Segments

Ball Joint Segments

Ball joints help machines move in different directions. Like any moving component, they can see wear over time. We offer ball joint segments for your end finishing machines to keep them moving smoothly and seamlessly. Explore the parts below to find the right ball joint segment for your Huth machine. 

No. Description* Comments Finger No. Replacement Rubber O'Ring Replacement Steel O'Ring
410 13⁄4" – 17⁄8" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 610 2 – 864 2 – 869
419 2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 619 2 – 864 2 – 869
420 21⁄4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 620 2 – 864 2 – 869
421 21⁄2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 621 2 – 864 2 – 869
454 23⁄4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 624 3 – 869  
452 3" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 652 3 – 869  
453 31⁄2" Used with 503 Arbor (Requires 512 or 523) 653 1 – 873, 2 – 875 (Urethane)  
*Note: Original Tube Sizes
V-Band Segment Set Tooling

V-Band Segment Set Tooling

V-bands feature a clamp assembly to expand and close to hold segment sets together. We offer heavy-duty v-band segment sets and components for your Huth pipe and tube expander machinery. Explore our v-band segment sets below to get the correct set for your particular machine.

No. Description* Comments Finger No. Replacement Rubber O'Ring Replacement Steel O'Ring
435  2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only) 		 635   4 – 869
436  21/4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only) 		 636   4 – 869
437  21/2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only) 		 637   4 – 869
438  23/4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only) 		 638   4 – 869
439  3" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only) 		 639   4 – 869
*Note: Original Tube Size
Bead Segments

Bead Segments

Bead segments fit with arbors to create end finishes for your BendPak bender. Create beads for clamps and hoses with these bead segment components for your tube and pipe machining. 

No. Description* Comments Finger No. Replacement Rubber O'Ring Replacement Steel O'Ring
460 11⁄4" Used with 575 Arbor and 570 Spacer
Or 496 Arbor (1685 Model Only)		 660 2 – 862 2 – 867
461 11⁄2" Used with 500 Arbor
Or 495 Arbor (1685 Model Only)		 661 2 – 862 2 – 867
462 13⁄4" Used with 572 Arbor
Or 508 Arbor with 498 Tip
Or 497 Arbor (1685 Model Only)		 662 3 – 863 2 – 868
463 2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 663 1 – 861, 1 – 863 1 – 866, 1 – 868
464 21⁄4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 664 1 – 862, 1 – 864 1 – 867, 1 – 869
465 21⁄2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)		 665 1 – 863, 1 – 864 1 – 868, 1 – 869
466 3" Used with 573 Arbor
Or 508 Arbor with 499 Tip
​​​​​​​Or 497 Arbor (1685 Model Only)		 666 1 – 864,
1 – 873 Urethane		  
467 31⁄2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
​​​​​​​Or 497 Arbor (1685 Model Only)		 667 1 – 883 Urethane,
1 – 875 Urethane		  
468 4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
​​​​​​​Or 497 Arbor (1685 Model Only)		 668 1 – 874 Urethane,
1 – 878 Urethane		  
*Note: Original Tube Size
Flanging Segments

Flanging Segments

Flanging connects pipes. For flare tubing, our flanging tools can help you with end forming and finishing for lengths of pipe and tubing.

No. Description* Comments Finger No. Replacement Rubber O'Ring Replacement Steel O'Ring
411 13/4" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only)
– 413 or 414 Required		 611 1 – 862,
1 – 864		 1 – 867,
1 – 869
413  2" Ring – Use with 411      
414  21/4" Ring – Use with 411      
412 21/2" Used with 573 Arbor
Or 508 Arbor with 499 Tip
Or 497 Arbor (1685 Model Only) 
– 418 Required		 612 1 – 862,
1 – 864		 1 – 867,
1 – 869
418  21/2" Ring – Use with 412      
*Note: Original Tube Size
Vintage Arbors and Segments

Vintage Arbors and Segments

Huth machines are built to last for years. Many tube expander and pipe bender machines are still working after decades of use. If you’re looking for vintage expanding arbors and segments for your older equipment, we have you covered. This expanding family of tooling was last produced with new equipment in 1986.

If you need help navigating vintage arbors and segments or any of the components listed here, please reach out to our team! We’re happy to help you find the right tube and pipe end finishing expanders for your machine.

This Expanding family of tooling was last produced with new equipment in 1986.

NO. DESCRIPTION COMMENTS FINGER NO. Replacement Rubber O'Ring Replacement Steel O'Ring
501 Arbor 11⁄2" – 13⁄4" Discontinued- Use with Arbor 572. Used with Segment 422      
502 Arbor 13⁄4" – 23⁄4" Discontinued- Use with Arbor 573, Use with Segments 474, 475, 476, 477, and 478      
422 Segment 11⁄2" – 13⁄4" Discontinued- Use with Arbor 572. Use with Segment 472. 622 1 – 860, 1 – 862 1 – 865, 1 – 867
423 Segment 13⁄4" – 21⁄8" Discontinued- Use with Arbor 572. Use with Segment 474. 623 1 – 861, 1 – 863 1 – 866, 1 – 868
424 Segment 21⁄8" – 21⁄2" Discontinued- Use with Arbor 573, Use with Segment 475 624 1 – 862, 1 – 863 1 – 867, 1 – 868
425 Segment 21⁄2" – 23⁄4" Discontinued- Use with Arbor 573. Use with Segment 476. 625 1 – 863, 1 – 864 1 – 868, 1 – 869