Huth End Finishing Swager

All Huth tooling is machined to specific tolerances from solid steel. After it is machined, it is gas-carburized and oil quenched to a minimum hardness of 58 Rockwell “C” scale. We do not use cast iron for any of our tooling. All Huth tooling is available from shelf stock. However, Huth will manufacture custom tooling to your specification for sizes not listed in this schedule.

Contact Us for Details >

Clamp Collets (All Models After Jan '85)

Clamp Collets (All Models After Jan '85)

No. Imperial Size
1775 3/4” EMT
1709 1” EMT
1710 1”
1718 118
1714 114
1756 1516
1738 138
1712 112
1758 158
1734 134
1778 178
1720 2”
1720DF 2” Double Flare (Use with Part #518)
1728 218
1725 214
1723 238
1750 212
1729 234*
1731 278*
1730 3”*

*Requires 892 Collet Holder 

For Clamp Collets Prior To 1985 See Replacement Parts -  Vintage

No. Metric Size
1740 40mm
1742 42mm
1745 45mm
1700 48mm
1705 50mm
1728 54mm***
1755 55mm
1760 60mm

***218” = 54mm


Swage Dies

Swage Dies

No. Imperial Size
110 1”
118 118
114 114
138 138
112 112
158 158
134 134
178 178
120 2”
128 218
125 214
123 238
150 212
129 234
130 3”
No. Metric Size
140 40mm
142 42mm
145 45mm
148 48mm
149 50mm
128 54mm***
155 55mm
160 60mm
***218”=54mm

Reducing Dies

Reducing Dies

*Reducing Dies Require Clamp Collet 890, 891, or 892.

No. Imperial Size*
775 For 3/4” EMT  .799 OD
779 For 1” EMT  1.024 OD
780 2” to 134
781 214” to 2”
782 212” to 214
783 3” to 212
784 2” to 178
785 134” to 158
786 158 ” to 112
787 112” to 138
788 138” to 114
789 114” to 11 8
790 3” to 234
No. Metric Size*
760 (50mm to 45mm OD)
761 (55mm to 50mm OD)
762 (65mm to 60mm OD)

Ball Joint Tools - Female

Ball Joint Tools - Female

No. Size
555 134” , 178”, 2” (Female)
556 214” to 212” (Female)
564 234” to 3” (Female)

Ball Joint Tools - Male

Ball Joint Tools - Male

No. Size
550 134” (Male)
551 178” (Male)
552 2” (Male)
553 214” (Male)
554 212” (Male)
557 134” to 212” (Domer)
558 258” to 234” (Domer)

Flaring/Flanging Tools

Flaring/Flanging Tools

No. Size
518 Flare Tool - 2” Double Flare and 112” Flat Flare*
519 Flare Tool - 134” and 158” Double Flat Flare*
853 Pipe Flanger 112”  to 3” - (Replaces Pipe Flangers 848, 849, 850, 851)
*NOT SHOWN

SWAGER TOOLS

SWAGER TOOLS

No.  
832  Double End Cylinder Stop- Used to control cylinder stroke

Header Collector Tool

Header Collector Tool

No. Size
101 3”
102 312

Clamp Collets (All Models From Sept. ‘81 to Jan. ‘85) (Vintage Models) MADE TO ORDER ONLY

Clamp Collets (All Models From Sept. ‘81 to Jan. ‘85) (Vintage Models) MADE TO ORDER ONLY

No. Size
710 1”
718 118
714 114
738 138
712 112
758 158
734 134
778 178
720 2”
728 218
725 214
723 238
750 212

Clamp Collets (All Models 1955-Sept. ‘81) (Vintage Models) MADE TO ORDER ONLY

Clamp Collets (All Models 1955-Sept. ‘81) (Vintage Models) MADE TO ORDER ONLY

No. Size
210 1”
218 118
214 114
238 138
212 112
258 158
234 134
278 178
220 2”
228 218
225 214
223 238
250 212

*Note:  No Longer Stock Item - Available as Special Tooling