. Swager Tooling for BendPak® Machines | Huth Ben Pearson International LLC
Die Packages
Die Packages
Tooling Packages
Tooling Packages
Huth Tooling for BendPak® Machines
Huth Tooling for BendPak® Machines
Tooling Size Packs (round)
Tooling Size Packs (round)
Tooling Fabrication Packs
Tooling Fabrication Packs
Bending Dies & Shoes
Bending Dies & Shoes
End Finishing Swager
End Finishing Swager
End Finishing Expander
End Finishing Expander
Square Bending Tooling
Square Bending Tooling

Swager Tooling for BendPak® Machines

Huth has made tooling for BendPak® machines for a long time… since their customers insisted on it! Huth tooling is machined in America to specific tolerances from solid steel. After it is machined, it is gas-carburized and oil quenched to a minimum hardness of 58 Rockwell “C” scale. All Huth tooling is readily available from shelf stock. However, Huth will manufacture custom tooling to your specification for sizes not listed in this schedule.

BendPak® is a registered trademark of BendPak, Inc

PKDS-823 AND PKDF-818

PKDS-823 AND PKDF-818

Allows you to utilize Huth Swage Tooling directly on to your BendPak® machine.

BendPak® is a registered trademark of BendPak

No. Product Description
PKDS-823 Quick Disconnect-Male, Huth Swage Tooling Adapter 
PKDF-818 Female Quick Disconnect For BendPak® benders
SWAGE DIE

SWAGE DIE

Huth Swage die shown with with the PKDS-823

Requires the PKDS-823 Adapter

No. Imperial Size ID
110 1"
118 11⁄8"
114 11⁄4"
138 13⁄8"
112 11⁄2"
158 15⁄8"
134 13⁄4"
178 17⁄8"
120 2"
128 21⁄8"
125 21⁄4"
123 23⁄8"
150 21⁄2"
129 23⁄4"
130 3"
Reducing Dies

Reducing Dies

Requires the PKDS-823 adapter

No. Imperial Size- ID* 
775 For 3/4" EMT  .799 OD
779 For 1" EMT  1.024 OD
780 2" to 13⁄4"
781 21⁄4" to 2"
782 21⁄2" to 21⁄4"
783 3" to 21⁄2"
784 2" to 17⁄8"
785 13⁄4" to 15⁄8 "
786 15⁄8 " to 11⁄2 "
787 11⁄2" to 13⁄8"
788 13⁄8" to 11⁄4 "
789 11⁄4" to 11⁄ 8 "
790 3" to 23⁄4 "
Ball Joint Tools - Female

Ball Joint Tools - Female

No. Size
555 13⁄4" , 17⁄8", 2" (Female)
556 21⁄4" to 21⁄2" (Female)
564 23⁄4" to 3" (Female)
Ball Joint Tools - Male

Ball Joint Tools - Male

No. Size
550 13⁄4" (Male)
551 17⁄8" (Male)
552 2" (Male)
553 21⁄4" (Male)
554 21⁄2" (Male)
557 13⁄4" to 21⁄2" (Domer)
558 25⁄8" to 23⁄4" (Domer)
Flaring/Flanging

Flaring/Flanging

No. Size
853 Pipe Flanger 11⁄2"  to 3" - (Replaces Pipe Flangers 848, 849, 850, 851)
Header Collector Tool

Header Collector Tool

Requires the PKDS-823 Adapter

No. Size
101 3"
102 31⁄2"